these are four 6" x 6" boards
total 2' x 6"
they connect between my other boards
made separate little boards so that they can be put in any order to add some variety
they are 1" and can be flipped for flat dirt and grass surface (e.g. so that trees or town walls can be added) (not shown); that's why nothing protrudes above the wall line
to be built later: a bridge
it's only a slight elevation change on these boards but they provide partial cover and change line of sight
water is water based clear gloss from hardware store, added a bit of green for last coat; think you can see the stones from river bottom through
4 shots to try and show the minor elevation variations on boards
comments & questions welcome
PS I now have enough fully completed boards for my full 7' x 3.5" table
and I have enough buildings to fill every board
except I don't have a table that size built yet to display everything all at once
soon I hope...